<< Prev            Next >>
  

Additional configurations are available. Contact Customer Service at 1-800-BERKTEK (1-800-237-5835) Build a new part by selecting attributes below:
Product Category:	Fiber Products
Product Sub Category:	--Select a sub-category-- Pre-Terminated Multi-Fiber Cable Assemblies Jumper Assemblies Pigtail Assemblies
Cable Type:	Click to see descriptions.
	Adventum (6-144 Fiber, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable). For higher fiber counts contact 1-800-BERK-TEK. Adventum with ArmorTek (6-144 Fiber, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable with Aluminum Interlocking Armor). For higher fiber counts contact 1-800-BERK-TEK. Adventum Tight Buffer (1-2 Tight Buffered Fibers, 900 micron, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable) Micro Data Center (4-72 Fiber MDP, Loose Tube Plenum, Indoor only, for Data Center High Density Installations) Premises Distribution (6-144 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable) Premises Distribution with ArmorTek (6-144 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable with Aluminum Interlocking Armor) Ribbon Interconnect (12 Fiber, Indoor Plenum Optical Cable) Interconnect Round (2-4 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable)
Cable Flame Rating:	Plenum Riser
Fiber Strands Count:	Total Fiber Count: 12 18 24 36 48 72 96 144
	Multimode Count:      Singlemode Count:
Fiber Type:	Click to see descriptions.
	62.5/125µm OM1, (200/500 MHz•km at 850/1300nm). 1 GbE to 300m at 850nm 62.5/125µm GIGAlite 50/125µm GIGAlite Exceeds OM2, (950/500 MHz•km at 850/1300nm). 1 GbE to 750m and 10 GbE to 150m at 850nm 50/125µm GIGAlite-10 OM3, (2000/500 MHz•km at 850/1300nm). 1 GbE to 1000m and 10 GbE to 300m at 850nm 50/125µm GIGAlite-10XB Exceeds OM4, (4900/500 MHz•km at 850/1300nm), 1 GbE to 1210m and 10 GbE to 600m at 850nm SingleMode OS2/OS1 Additional optical fiber offerings available. Contact 1-800-BERK-TEK
	Outside End - Pulling End
Break-Out Side A:	900 Micron    2.0mm Furcation   None (Standard Breakout is 39")
Custom Requirement Side A:
	Please Specify Special Requirements
Key Side A:	Standard    Secured Red     Secured Yellow     Secured Green     Secured Blue
Connector Side B:	Inside End
Break-Out Side B:	900 Micron    2.0mm Furcation      None (Standard Breakout is 39")
Custom Requirement Side B:
	Please Specify Special Requirements
Key Side B:	Standard    Secured Red     Secured Yellow     Secured Green     Secured Blue
	When creating an assembly with connectors on 1 side only, it is recommended that the connectors be on the inside end (Side B).
Ground Wire:	Side A    Side B     Both     None
Pulling Eye Option:	No    Outside End - Pulling End    Both Ends For maximum protection of the terminated inside cable end, a pulling-eye on BOTH cable ends should be specified Contact Inside Sales for Pulling Eye Options
Pulling Eye Type:	Std w/ Crush Resistant Tube Standard Pulling eye requires min. 3" ID duct (PE has a OD 2" nom)
Length Type:	Specific:     Per Foot/Meter Adder:     Multiple Lengths:
Enter Length:		5 6 7 8 9 10  Meters
Enter Multi-Lengths:	1. 2. 3. 4. 5. 6. 7.
Multi-Length Qtys:	1. 2. 3. 4. 5. 6. 7.
Units:	Feet Meters
Order Quantity:
Berk-Tek Part #:
Berk-Tek Description: