Additional configurations are available. Contact Customer Service at 1-800-BERKTEK (1-800-237-5835)
Enter an existing part:
or build a new part by configuring your assembly below:
|
|
|
Product Category: |
|
|
Product Sub Category: |
|
|
Cable Type: |
Click
here for more detail |
|
Adventum
|
Move cursor over text below to view cable image.
- Adventum (6-144 Fiber, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable). For higher fiber counts contact 1-800-BERK-TEK.
- Adventum with ArmorTek (6-144 Fiber, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable with Aluminum Interlocking Armor). For higher fiber counts contact 1-800-BERK-TEK.
- Adventum Tight Buffer (1-2 Tight Buffered Fibers, 900 micron, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable)
- Micro Data Center (4-72 Fiber MDP, Loose Tube Plenum, Indoor only, for Data Center High Density Installations)
- Premises Distribution (6-144 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable)
- Premises Distribution with ArmorTek (6-144 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable with Aluminum Interlocking Armor)
- Ribbon Interconnect (12 Fiber, Indoor Plenum Optical Cable)
- Interconnect Round (2-4 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable)
|
|
Cable Flame Rating: |
Plenum
Riser
|
|
Fiber Strands Count: |
Total Fiber Count:
|
|
|
Multimode Count: Singlemode Count: |
|
Fiber Type: |
Click
here for more detail |
|
- 62.5/125µm OM1, (200/500 MHz•km at 850/1300nm). 1 GbE to 300m at 850nm
- 62.5/125µm GIGAlite
- 50/125µm GIGAlite Exceeds OM2, (950/500 MHz•km at 850/1300nm). 1 GbE to 750m and 10 GbE to 150m at 850nm
- 50/125µm GIGAlite-10 OM3, (2000/500 MHz•km at 850/1300nm). 1 GbE to 1000m and 10 GbE to 300m at 850nm
- 50/125µm GIGAlite-10XB Exceeds OM4, (4900/500 MHz•km at 850/1300nm), 1 GbE to 1210m and 10 GbE to 600m at 850nm
- 10/125um GIGAlite-10FB, OM4 (4700/500 MHz•km at 850/1300nm), 1 GbE to 1000m and 10 GbE to 550m at 850nm
- SingleMode OS2/OS1
- Additional optical fiber offerings available. Contact 1-800-BERK-TEK
|
|
|
Outside End - Pulling End
|
|
Default polarity method used is Method A (Straight Through). To select Method B (Reversed) or Method C (Pair Crossed),
click the "Custom Requirement" box and type in the desired polarity method.
|
|
Break-Out Side A: |
900 Micron
2.0mm Furcation
None
(Standard Breakout is 39")
|
|
Custom Requirement Side A: |
Click this box to enter custom breakout length, special jacket color, custom labeling,
etc. |
|
|
Please Specify Special Requirements
|
|
Key Side A: |
Standard
Secured Red
Secured Yellow
Secured Green
Secured Blue
|
|
Connector Side B: |
Inside End
|
|
Default polarity method used is Method A (Straight Through). To select Method B (Reversed) or Method C (Pair Crossed),
click the "Custom Requirement" box and type in the desired polarity method.
|
|
Break-Out Side B: |
900 Micron
2.0mm Furcation
None
(Standard Breakout is 39")
|
|
Custom Requirement Side B: |
Click this box to enter custom breakout length, special jacket color, custom
labeling, etc. |
|
|
Please Specify Special Requirements |
|
Key Side B: |
Standard
Secured Red
Secured Yellow
Secured Green
Secured Blue
|
|
|
When creating an assembly with connectors on 1 side only, it is recommended that the connectors be on the inside end (Side B).
|
|
Ground Wire: |
Side A
Side B
Both
None
|
|
Pulling Eye Option: |
No
Outside End - Pulling End
Both Ends
For maximum protection of the terminated inside cable end,
a pulling-eye on BOTH cable ends should be specified
|
|
Pulling Eye Type: |
Std w/ Crush Resistant Tube
Standard Pulling eye requires min. 3" ID duct (PE has a OD 2"
nom)
|
|
Length Type: |
Specific:
Per Foot/Meter Adder:
Multiple Lengths:
|
|
Enter Length:
|
|
|
|
Enter Multi-Lengths: |
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
|
|
Multi-Length Qtys:
|
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
|
|
Units: |
Feet
Meters
|
|
Order Quantity:
|
|
|
Berk-Tek Part #:
|
|
|
Berk-Tek Description:
|
|
|
|
|
|