Please use this configurator to determine your requirements, then cut and paste the part # and full description into an email to your local manufacturer sales rep or BerkTek inside sales person to request pricing and lead time information.

Enter an existing part:     or build a new part by configuring your assembly below:

Product Sub Category:	--Select a sub-category-- Pre-Terminated Multi-Fiber Cable Assemblies Jumper Assemblies Pigtail Assemblies
Cable Type:	*   Click here for more detail
Adventum	Move cursor over text below to view cable image. Adventum (6-144 Fiber, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable). For higher fiber counts contact 1-800-BERK-TEK. Adventum with ArmorTek (6-144 Fiber, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable with Aluminum Interlocking Armor). For higher fiber counts contact 1-800-BERK-TEK. Adventum Tight Buffer (1-2 Tight Buffered Fibers, 900 micron, Indoor/Outdoor Loose Tube, Dry Water Block, Plenum or Riser Optical Cable) Aramid Connect Plenum (Aramid Connect Plenum Description). For higher fiber counts contact 1-800-BERK-TEK. Micro Data Center (4-144 Fiber MDP, Loose Tube Plenum, Indoor only, for Data Center High Density Installations) Micro Data Center with ArmorTek (4-144 Fiber MDPK, Loose Tube Plenum with Aluminum Interlocking Armor, Indoor only, for Data Center High Density Installations) Premises Distribution (6-144 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable) Premises Distribution with ArmorTek (6-144 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable with Aluminum Interlocking Armor) Ribbon Interconnect (12 Fiber, Indoor Plenum Optical Cable) Interconnect Round (2-4 Tight Buffered Fibers, 900 micron, Indoor Plenum or Riser Optical Cable)
I/O
Cable Flame Rating:	Plenum Riser
Fiber Strands Count:	Total Fiber Count: 121824 364872 96144
	Multimode Count:      Singlemode Count:
Fiber Type:	*  Click here for more detail
	62.5/125µm OM1, (200/500 MHz•km at 850/1300nm). 1 GbE to 300m at 850nm 62.5/125µm GIGAlite 50/125µm GIGAlite Exceeds OM2, (950/500 MHz•km at 850/1300nm). 1 GbE to 750m and 10 GbE to 150m at 850nm 50/125µm GIGAlite-10 OM3, (2000/500 MHz•km at 850/1300nm). 1 GbE to 1000m and 10 GbE to 300m at 850nm 50/125µm GIGAlite-10XB Exceeds OM4, (4900/500 MHz•km at 850/1300nm), 1 GbE to 1210m and 10 GbE to 600m at 850nm 50/125um GIGAlite-10FB, OM4 (4700/500 MHz•km at 850/1300nm), 1 GbE to 1000m and 10 GbE to 550m at 850nm SingleMode OS2/OS1 Additional optical fiber offerings available. Contact 1-800-BERK-TEK
	Outside End - Pulling End
	Default polarity type used is Type A (Straight Thru). Available polarity types are listed in the “Polarity” section below.
Break-Out Side A:	900 Micron    2.0mm Furcation   None (Standard Breakout is 39")
Custom Requirement Side A:	Click this box to enter custom breakout length, special jacket color, custom labeling, etc.
	Please Specify Special Requirements Category Breakout Length No Stagger Soft Pulling Eye Special Jacket Color Stagger Length Furcation Tube Size Specific Fiber Vendor Other * Details *
Key Side A:	Standard    Secured Red     Secured Yellow     Secured Green     Secured Blue
Connector Side B:	Inside End
	Default polarity type used is Type A (Straight Thru). Available polarity types are listed in the “Polarity” section below.
Break-Out Side B:	900 Micron    2.0mm Furcation      None (Standard Breakout is 39")
Custom Requirement Side B:	Click this box to enter custom breakout length, special jacket color, custom labeling, etc.
	Please Specify Special Requirements Category Breakout Length No Stagger Soft Pulling Eye Special Jacket Color Stagger Length Furcation Tube Size Specific Fiber Vendor Other * Details *
Key Side B:	Standard    Secured Red     Secured Yellow     Secured Green     Secured Blue
	When creating an assembly with connectors on 1 side only, it is recommended that the connectors be on the inside end (Side B).
Ground Wire:	Side B Only
Pulling Eye Option:	No    Outside End - Pulling End    Both Ends For maximum protection of the terminated inside cable end, a pulling-eye on BOTH cable ends should be specified Contact Inside Sales for Pulling Eye Options
Pulling Eye Type:	Std w/ Crush Resistant Tube Standard Pulling eye requires min. 3" ID duct (PE has a OD 2" nom)
Polarity	Click here for more detail
Length Type:	SpecificPer Foot/Meter AdderMultiple Lengths
Enter Length:	*	1 2 3 4 5 6 7 8 9 10  Meters
Enter Multi-Lengths:*	1.* 2.* 3.* 4.* 5.* 6.* 7.* 8.* 9.* 10.*
Multi-Length Qtys:	1.* 2.* 3.* 4.* 5.* 6.* 7.* 8.* 9.* 10.*
Competitor Price:	1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Units:	Feet Meters
Order Quantity:	* * *
BerkTek Part #:
BerkTek Description:
Notes (Internal Comments):